Mizuno T24 Wedge - Soft White Satin

The Mizuno T24 Wedges (Soft White Satin) have been reworked by Mizuno craftsman with subtle top-line refinements visible from the playing position.  Grain Flow Forged in Hiroshima Japan, ensures precise shaping and an unrivalled touch around the green. Now with higher spinning QUADCUT+ grooves and five unique sole profiles.

The new QUADCUT+ Grooves came from the realisation that an adjustment to the camber of the groove shoulder and the taper of the groove profile would create an opportunity to move our grooves closer together, resulting in more spin.  

THREE FINISH OPTIONS: Soft White Satin (with copper underlay), Denim Copper and Tour Raw.

Features & Benefits:

• FORGED IN HIROSHIMA JAPAN 
  One-piece Grain Flow Forged HD Boron in Hiroshima, Japan, where Mizuno irons have been produced since 1968. 
• CRAFTSMAN REFINED TOPLINE 
  Mass taken from the toe portion, and a lower hosel blend creates a smaller profile without loss of effective hitting area. 
• WRAP-AROUND SOLE RELIEF 
  Increased sole relief to heel and toe across all 5 grind options. 
• SPIN-WEIGHTED BLADE DESIGN 
  A flared upper portion of the blade creates higher spin and penetrating trajectory – particularly from strikes high on the clubface. 
• QUADCUT+ GROOVES 
  An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots. 
• WET WEATHER PERFORMANCE 
  Mizuno's HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off. 
• LOFT SPECIFIC PROFILE 
  Straight leading edge on lower lofts (to 51), into traditional teardrop, and more rounded lob wedges (58 and above).

Sole Profiles:

• S:  High bounce with limited relief.  For full shots.
• D:  Mid bounce with moderate relief for gentle manipulation.
• C:  Mid / high bounce with generous relief for across a wide range of players / conditions.
• V:  High bounce with aggressive relief for versatility and steeper attack angle.
• X:  Low bounce with aggressive relief for versatility and shallow attack angle.

Specifications:

Club	Loft	Bounce	Grind	Length	Lie	SW
46-08	46°	8°	S	35.50"	63°	D3-5
48-10	48°	10°	S	35.50"	63°	D3-5
50-08	50°	8°	S	35.25"	63°	D3-5
52-10	52°	10°	S	35.25"	63°	D4-6
54-10	54°	10°	S	35.25"	63°	D4-6
56-12	56°	12°	S	35.25"	63°	D4-6
54-08	54°	8°	D	35.25"	63°	D4-6
56-10	56°	10°	D	35.25"	63°	D4-6
58-12	58°	12°	D	35.25"	63°	D4-6
56-06	56°	6°	C	35.25"	63°	D4-6
58-08	58°	8°	C	35.25"	63°	D4-6
60-10	60°	10°	C	35.25"	63°	D4-6
56-08	56°	8°	V	35.25"	63°	D4-6
58-10	58°	10°	V	35.25"	63°	D4-6
60-12	60°	12°	V	35.25"	63°	D4-6

NOTE: SW = Swing Weight