Evnroll ER11vx Putter

The Evnroll ER11vx High MOI Mallet Putter is a modified version of the ER11v and is packed full of performance-enhancing technology. The putter is made from a black anodised 6061 aluminium, which is lighter than the silver steel sections to create the high MOI and features a single sightline for alignment. 

SWEETFACE TECH

The ER11vx High MOI Mallet Putter utilises Evnroll's Patented SWEETFACE technology.

Premise: On a 25-foot putt a ball hit ½” off centre, outside the Sweet Spot (centre of percussion), will travel 6” to 8” offline and 12” to 18” shorter. That miss-hit is a missed putt.

How it works:

• Zero Dispersion - A series of closely spaced variable-width channels that are wider in the centre and get gradually narrower toward the heel and toe. This creates a precisely calibrated inward v-shape from both the heel and toe that progressively redirects the ball down the target line.
• Even Roll Distance - Because the channels get narrower away from the centre, the spacing gets wider. This increase in contact surface means more energy transfer and replaces the energy lost when a ball is hit away from the sweet spot. So centre and off-centre hits travel the same distance.

Toe Hang Specs:

• Short Plumber  = 10 degrees of toe hang 
• Short Slant  = 15 degrees of toe hang
• Long Slant  = 9 degrees of toe hang

Specifications:

• CNC Milled in Carlsbad, CA
• Head Material – Black anodized 6061 aluminum, 303 stainless steel weights
• Weight – Tour preferred swingweight at each length. One Dot @ 35”, Two Dots @ 34”, Three Dots @ 33”.
• Loft Angle – 2 degrees
• Lie-Angle – 70 degrees
• Stock Grip – EVNROLL Gravity Grip
• Length – Measured from center of leading edge to top of grip
• Shaft – stepless shaft with .370 tip with Black ceramic finish
• Shafting – Straight shaft mounted into an overfit hosel