Pre-Owned Evnroll ER10 Outback Mallet Putter - RH - 35 Inch

This is a genuine authentic Pre-Owned Club that has been assessed by one of our expert team members. It comes with a 6 month warranty. Pre Owned clubs are only available online.

The condition rating is: Like New

Refer to our conditions guide below for a breakdown of the rating assessment parameters.

Product Summary

*Product images shown are of the new product and may not accurately represent the golf club being purchased. Please refer to the condition guide.

The Evnroll ER10 Outback Mallet is a ultra high MOI oversized mallet.

SWEETFACE
The Evnroll ER10 Outback Mallet utilises Evnroll's Patented SWEETFACE technology.

Premise: On a 25-foot putt a ball hit ½” off centre, outside the Sweet Spot (centre of percussion), will travel 6” to 8” offline and 12” to 18” shorter. That miss-hit is a missed putt.

How it works:
Zero Dispersion - A series of closely spaced variable-width channels that are wider in the centre and get gradually narrower toward the heel and toe. This creates a precisely calibrated inward v-shape from both the heel and toe that progressively redirects the ball down the target line.

Even Roll Distance - Because the channels get narrower away from the centre, the spacing gets wider. This increase in contact surface means more energy transfer and replaces the energy lost when a ball is hit away from the sweet spot. So centre and off-centre hits travel the same distance.

By placing a 70-gram steel rod along the entire length of the grip ½ inch below the shaft, the hands can feel the precise angle of the face. The hands and the putter head are tied together creating a square zone before and after impact. Feeling is believing.

Specifications:

• CNC Milled in Carlsbad, California USA
• Head Material: Black Armored 6061 aluminum, 303 stainless steel rear wing weight.
• Head Weight by Length:
• 35” - 355g
• Face Loft: 2 degrees from shaft
• Lie-Angle: 70 degrees
• Grip: Custom Evnroll Black Tour Tac
• Length: Measured from centre of leading-edge to butt
• Balance: Face balanced
• Shaft: FST stepless, .370” tip with black armour finish
• Shafting: Single bend mounted directly into the head